| 1. | Numerical value simulation of hot metal flowing in slab concaster mould
板坯连铸结晶器内钢液流动数值模拟 |
| 2. | Effect of guiding angle on metal flow and defects in extrusion deformation
导流角对挤压变形中金属流动与缺陷的影响 |
| 3. | Stress and metal flow in steel tube during sizing process were analyzed
分析了定径过程中钢管内金属流动和弹复行为。 |
| 4. | Metal flow behavier in friction stir welding of lf6 aluminum alloy and ld10 aluminum alloy
6搅拌摩擦焊的金属塑性流动 |
| 5. | Both the influences of the die degree for the deforming and the metal flow and the influencing factors of the deforming force are studied in this paper
模拟结果与试验结果基本吻合，说明本文采用的计算模型是合理的，为进一步优化工艺参数提供了数值模拟手段。 |
| 6. | In this paper , the metal flow route during closed die extrusion for spiral bevel driving gear of automotive final drive is analyzed and the profile of preformed blank has been designed
摘要分析了主动螺旋伞齿轮闭塞挤压的金属流动路线，设计了预制坯的形状。 |
| 7. | Metal flow is a very inhomogeneous process during backward extrusion of complex box body , relative shape and size of the blank is a key factor which affect metal flow
摘要复杂盒形零件的反挤压是一个极其不均匀的流动过程，坯料的相对形状及尺寸是影响金属流动的关键因素。 |
| 8. | All watts flow measurement devices of this type are supplied with a permanent metal flow characteristic curve which should be affixed to one of the pressure taps on the device using the chain , also supplied
这种类型的所有美国瓦茨流量测量装置还配置永久性金属流量特性曲线，记录在压力标签上，用链条附加在装置上。 |
| 9. | On the basis of analysis blank effect on metal flow , optimum blank was choosed by physical simulation , and validated by experiment , trial - manufactured extruded part which accorded entirely technic demand
在分析均匀摩擦条件下坯料对金属流动影响的基础上，采用物理模拟的手段确定了合理的坯料，并进行了实验验证，挤压出了符合产品要求的工件。 |
| 10. | Furthermore , asymptotic techniques to analyze large hartmann parameter flow and interaction parameter flow are employed and an analytical model has been developed for the calculations of mhd pressure drop of liquid metal flow in a packed pebble bed
利用渐近线分析法对大hartmann参数流进行分析，给出了球床液态金属溢流的磁流体动力学压力损失的建模分析和计算结果。 |
